There are many different types of underfloor heating systems. Hydronic and dry systems are two of the most common, but geothermal and electric are also available. Which is the best choice for your home? There are many benefits to both options, and we’ll cover the pros and cons of each. In addition, we’ll explain how these types of systems differ from one another. Whether you choose a hydronic system or an electric one depends on your personal preferences and the size of your room.
Electric underfloor heating
If you are looking for a more energy efficient way to heat your home, an electric 123vloerverwarming might be the perfect choice. This system can be installed on different types of floors, including tiles, timber floors, and carpet. It also circulates heat throughout the entire space, keeping floors warm even when the electricity is switched off. Electric underfloor heating systems can be purchased from reputable trade brands. In addition to the many benefits of electric underfloor heating, it is also relatively inexpensive to install.
A basic electric underfloor heating system can be laid yourself, but you will need a qualified electrician to connect the system to your electricity supply and add a thermostat. Electric underfloor heating is not difficult to install but it is a good idea to seek professional help if you are not confident with DIY projects. Professional installers can provide you with advice about whether certain rooms will suit electric heating, prepare the floor and run the necessary wiring. In addition, they can draw up a wiring plan to ensure that wires are not routed under permanent fixtures such as sinks and radiators.
Hydronic underfloor heating
One of the benefits of a Hydronic underfloor heating system is its ability to quickly heat up a room. While an electric underfloor heating system requires less time to heat up a room, it will take a few hours for the same amount of heat to penetrate a floor. Depending on how you heat a room, you may want to consider installing additional insulation to keep the floor warmer for longer. Insulation will also prevent downward heat loss, which is a bonus when you’re trying to save money.
The best part about a hydronic underfloor heating system is that it can be installed with relatively little effort. These systems can be overlaid with vinyl, wood, or carpet. In newly constructed homes, hydronic underfloor heating systems are commonly installed in bathrooms. They add a sense of luxury to living spaces. However, you should remember that an electric system may not be as versatile or affordable as a hydronic one.
Dry underfloor heating
Dry underfloor heating systems can either be a wet or dry system. They both work with a heating facility. The wet system tends to be the most efficient, and it works with either a gas boiler or heat pump. The dry system requires the installation of pipes and electrical wires. The dry system is usually more expensive than its wet counterpart. If you’re unsure of which type to choose, read Homebuilding & Renovating’s Underfloor Heating Guide for details.
The cost of installing a dry system is about PS1650 to PS1750 for a 40m2 floor, but it can cost as much as PS4200 if the floor area is more than 60m2. Electric systems, on the other hand, can cost up to PS5700 for an 80m2 floor surface. Both types of underfloor heating can be expensive, so make sure you have plenty of money to spend.
Geothermal underfloor heating
A Geothermal underfloor heating system uses the ground’s constant temperature to maintain the desired temperature in your home. This type of system is highly efficient, helping you to save on energy costs and maintain a comfortable temperature inside your home all year round. When installed correctly, a Geothermal system can cut your energy costs by 30%. Here’s how it works. You can control the temperature in each room individually, and save money on energy bills by 30% or more.
A Geothermal underfloor heating system uses heat generated by the earth’s natural temperature to warm your home. A Geothermal system uses three water probes set one hundred meters beneath the ground. The water that is heated then passes through the pipes, which are installed under the floor. A geothermal system generates about twelve thousand watts of heat and consumes only 4,000 watts, while the unit’s pump consumes about 12000 kW. Geothermal systems are completely self-regulating, and require no additional thermal conditioning devices.
